Hope everyone had a great off-season and is getting back into the swing of things with school back in session!
Finding its way to the website tonight - HTD Timing Belts
Single and double sided HTD timing belts. These belts are fiberglass reinforced and come in 9mm and 15mm widths.
We’re stocking both 9mm and 15mm widths - single sided and double sided.
For single sided we have every 5 teeth from 35t-200t and then every 10t from 200t-300t. For double sided we just took a guess to start but can stock others if teams want specific sizes.
We also had the first batch of swerve modules show up today & are going through the process of unpacking, kitting and checking them. The plan is to get those orders shipping out next week -
Just in case you missed it, here are some of the items we launched over the Summer:
All kits and parts related to Thrifty Swerve
Powered by Grapple Robotics, the LaserCAN is a LIDAR sensor purpose-built for FRC teams! This postage-stamp sized sensor is capable of detecting objects up to 4m (13 feet!) away (or 1.35m (4.5 feet) in short range mode). It contains an adjustable FOV and Region of Interest that lets teams filter out what they do not want in a distance measuring tool.
Price: USD 42.50
These aluminum 5M HTD Pulleys work great for creating belt reductions directly off the motor. Use a 15mm wide belt or two 9mm wide belts as the inside pulley teeth are 18.5mm wide. Choose either Kraken SplineXS bore, 8mm keyed bore, or Falcon spline bore depending on the motor type you're using.
Price: USD 12.99
This 5M HTD aluminum pulley will allow teams to create belt reductions and drive mechanisms with a common 1/2" hex interface. We focused on robustness and tested them thoroughly during the 2024 season to ensure the flanges do not pop off during use.
Price: USD 12.99
This 36 tooth 5M HTD aluminum pulley will allow teams to create belt reductions and drive mechanisms with a common 1/2" hex interface. We focused on robustness and tested them thoroughly during the 2024 season to ensure the flanges do not pop off during use.
Price: USD 16.99
This 48 tooth 5M HTD aluminum pulley will allow teams to create belt reductions and drive mechanisms using a hub interface or on a shaft. We focused on robustness and tested them thoroughly during the 2024 season to ensure the flanges do not pop off during use.
Price: USD 24.99
Thrifty USB cables are here! These high quality USB cables work great to connect motor controllers and other devices to your computer.
Price: USD 4.99
More good stuff on the way soon, stay tuned!
