2025 Kickoff Announcement
Ryan Dognaux
Just in time for kickoff, here are many new products finding their way to the website today. There are a still a few stragglers incoming that we should see within the next week or two (SDS billet motor spacer for example.)
Here’s a firehose of links, happy kickoff and good luck this season teams!
Includes two corner mount blocks for your SDS MK4 series modules. Each mounting block includes twelve 10-32 threaded holes, providing teams extra options for mounting items right on the corner of their swerve chassis. Uses 3 bolts to attach to the...
Price: USD 39.99
#35 chain billet sprockets include a 1.126" bore, 1.875" and 2" hole patterns that include nut pockets on each side and 1/2" hole spacing nut pocket ribs for 10-32 locknuts. Made from 6061-T6 aluminum. STEP CAD Files Available
Price: USD 29.99
#25 chain billet sprockets include a 1.126" bore, 1.875" and 2" hole patterns that include nut pockets on each side and 1/2" hole spacing nut pocket ribs for 10-32 locknuts. Made from 6061-T6 aluminum. STEP CAD Files Available
Price: USD 29.99
These #25 small drive sprockets are intended to be used off a motor or gearbox output shaft for your initial reduction stage. They are made from 4140 steel. STEP CAD Files Available
Price: USD 9.99
These #25 small drive sprockets are intended to be used off a motor or gearbox output shaft for your initial reduction stage. They are made from 4140 steel. STEP CAD Files Available
Price: USD 9.99
These tube plugs are designed for teams to use them with a variety of tube standards and wall thicknesses in the FRC market today. At their core is an aluminum plug designed to work with 1/8" wall tubing. Sleeves can be 3D printed to adapt them to...
Price: USD 6.99
Utilize these 1" x 1" and 2" x 1" 10-32 threaded blocks to create multi-way joints in conjunction with Thrifty Multi-Tube Plugs. STEP CAD Files Available
Price: USD 9.99
These flanged bronze bushings are great for low rpm applications. Comes in a variety of sizes and diameters to support most use cases in FRC. STEP CAD Files Available
Price: USD 19.99
This shaft allows you to drive hubs, pulleys and other 3/8" hex broached items while also fitting into a 10.25mm ID bearing with ease. This shaft comes in lengths of 36 inches so you can cut them down to the size you need. Available in 7075...
Price: USD 19.99
These hex hubs have been updated for number 10 bolts and come in both thin and thick sizes. Includes both 1.875" and 2" bolt hole patterns to give teams maximum flexbility for using new and old standards in FRC. STEP CAD Files Available
Price: USD 14.99
6061-T6 aluminum plate sprockets for #25 chain. These include both 1.875" and 2" bolt hole patterns for number 10 holes and holes spaced in 1/2" increments to work with grid pattern tubing. STEP CAD Files Available
Price: USD 12.99
6061-T6 aluminum plate sprockets for #35 chain. These include both 1.875" and 2" bolt hole patterns for number 10 holes and holes spaced in 1/2" increments to work with grid pattern tubing. STEP CAD Files Available
Price: USD 12.99